Analysis on damage characteristics and detonation performance of solid rocket engine charge subjected to jet

To further explore the damage characteristics and impact response of the shaped charge to the solid rocket engine (SRE) in storage or transportation, protective armor was designed and the shelled charges model (SCM)/SRE with protective armor impacting by shaped charge tests were conducted. Air overpressures at 5 locations and axial acceleration caused by the explosion were measured, and the experimental results were compared with two air overpressure curves of propellant detonation obtained by related scholars. Afterwards, the finite element software AUTODYN was used to simulate the SCM impacted process and SRE detonation results. The penetration process and the formation cause of damage were analyzed. The detonation performance of TNT, reference propellant, and the propellant used in this experiment was compared. The axial acceleration caused by the explosion was also analyzed. By comprehensive comparison, the energy released by the detonation of this propellant is larger, and the HMX or Al particles contained in this propellant are more than the reference propellant, with a TNT equivalent of 1.168–1.196. Finally, advanced protection armor suggestions were proposed based on the theory of woven fabric rubber composite armor (WFRCA).     

Experimental and numerical investigation of zirconium jet performance with different liner shapes design

This paper studies the shaped charge jet performance in terms of different liner shapes including conical,bell,hemispherical and bi-conical liners.The critical angles and the relevant flow velocities for the zir-conium liner material were calculated analytically and numerically using Autodyn hydro-code.The relationship between the critical collapse angle and the flow velocity was determined for the conditions of jet formation and coherency.Penetration tests according to the standard testing procedures of API-RP34 (Section-Ⅱ) were performed to validate the numerical predictions of the jet performance of the studied liners.It was found that the four shaped charge liners all produced coherent jets with different performances.The penetration depth of the shaped charges with the bell and the bi-conical liner shapes increased by 10.3％ and 22％,respectively,while the crater diameter of shaped charge with hemispherical liner increased by 85％ representing the formation of an explosively-formed-projectile (EFP),when they are compared with the corresponding jet characteristics of a conical liner shaped charge.     

医院供配电系统谐波测量和分析

为治理日趋严重的医院供配电系统谐波污染,需要深入了解医院谐波分布。利用FLUKE 43B对某医院进行现场谐波测试,基于所得数据重点分析了医院供配电系统谐波污染和谐波源分布情况,根据医院谐波污染特点总结了治理方法。结果表明:医院供配电系统存在严重的谐波污染。被测量医院设备先进,种类齐全,测试所得数据具有较强的代表性,可为医院供配电系统谐波研究、谐波治理和滤波设备选择提供基础数据参考。     

基于随机拟合的悬浮式深弹弹阵特征建模＊

通过分析悬浮式深弹发射后在空中的弹道特性,建立了深弹弹着点坐标的计算模型。采取蒙特卡洛方法,分别对舰艇六自由度状态下,单管和六联装火箭深弹的弹着点坐标进行了仿真计算,对弹着点的分布规律进行了研究,并得出弹着点的联合密度函数。结果表明,在发射参数存在正态扰动时,弹着点散布区域均呈椭圆形分布,弹着点坐标均仍服从正态分布。     

高炮射击提前点的解法研究

针对高炮射击解提前点方法进行的研究,在图解法的基础上,运用解方程的思想,提出了精度更高的“系数调整法”、“图解逼近法”和“一元四次方程法”。较好地解决对匀速运动目标命中问题的求解,“图解逼近法”具有单方向收敛的优点。“一元四次方程法”可直接用消元法求解,不需循环。解法与迭代法比较,具有计算精度高、速度快,计算步骤、时间固定,在火控系统计算和修正等方面有重要的实用价值。     

几类特殊多叶函数的极值点和支撑点

设S(p,α)、C(p,α)及K(p,α)分别表示α阶的p 叶星像、凸像和近于凸函数族。本文对这些函数族的支撑点和S(p,α)的从属函数族的极值点和支撑点进行了研究,推广了Grassmann 和Perera 等人的结果。     

线导加尾流自导鱼雷保持距离导引法

依据线导加尾流自导鱼雷捕获和跟踪目标尾流的特殊要求,分析了现有导引方法的不足。利用鱼雷位置点与目标方位线之间的几何关系,提出了"保持距离导引法"的概念、建立了线导加尾流自导鱼雷的导引模型,从根本上消除了通过估计目标距离而确定目标方位修正量的困难,并通过仿真计算分析了这种方法的特点及作战应用的可行性。     

分段函数在分界点求导的一种简单的方法

介绍了用多项式根的性质与导数极限定理求分段函数在分界点的导数的简单方法。从而拓广了用导数定义求分界点导数的传统方法     

压剪加载下炸药装药中剪切带形成与发展模型

研究了在压剪加载下炸药这类粘塑性介质中剪切带的形成与发展。提出了一种反映炸药装药中剪切带形成和发展的计算方法,并分析了剪切带发展变化特性与炸药起爆的关系     

机载激光雷达数据的三维深度学习树种分类

针对传统基于激光雷达(Light Detection And Ranging,LiDAR)数据的树种分类方法难以直接且全面地利用点云的三维结构信息的问题,提出一种基于三维深度学习的机载LiDAR数据的树种分类方法.该方法直接从三维数据中抽象出高维特征,而无须将点云转化为体素或二维图像.以塞罕坝国家森林公园内白桦和落叶松...